null

Paradigm PDR W100

(No reviews yet) Write a Review

$499 In-Store Only 888-702-7800

SKU:
PARPDRW100
Unit of Measure:
Each

Product Overview

Look Ma, No Wires!

The arrival of the wireless PDR-W100 allows you to place your PDR subwoofer in the location where it will deliver the very best bass, not simply in a place convenient for plug-in to a wall outlet. For those annoyed by cable clutter or unsightly wiring along walls or baseboards, PDR-W100 is an ideal neat freak option! 

The PDR-W100 Wireless Transmitter is included when you purchase a PDR-W100 sub. Its digital self-sensing signal automatically adjusts for best wireless connection while monitoring the integrity of the data stream. It offers a sampling frequency of 48 kHz, 16 . The transmitter has an unobstructed range of 50’ / 15 m.

PDR Series subwoofers offer superb definition and deep bass impact for music and home theater. These high-performance designs use built-in high-performance, high-power amplifiers with high-current output, along with high-power drivers, to deliver stunning bass performance that represents completely unprecedented value. Their sleek lifestyle design simply adds to the reason they are the best selling budget subwoofers in the world!

Control Facilities:

• Auto On/Standby

• Subwoofer Level

• Subwoofer Cut-Off Frequency (continuously variable 35 Hz – 150 Hz); 
Bypass Option

• Sub/Sat Phase Alignment (continuously variable 0° to 180°)

Input Facilities:

• Line-level Inputs


Built-In High-Power, High-Performance Discrete Amplifiers provide tremendous high-current, low-distortion power: 360 watts Dynamic Peak / 120 watts RMS.

Superior Reinforced Polymer-Composite Cones provide articulate and extended bass performance with tremendous output and superb control.

High-Velocity Low-Noise Dual Rear Ports with critically flared openings ensure maximum bass efficiency and minimum turbulence distortion.

 

PDR W100 Specifications

Design

Single driver, bass reflex, high-velocity low-turbulence resistive port, built-in amplifier

Amplifier

360 watts Dynamic Peak / 120 watts RMS

Amplifier Features

Auto-On / Standby, soft clipping

Low Pass Filter Frequency

Variable 35 Hz - 150 Hz; Bypass Option

Low Frequency Driver

254-mm (10 in) reinforced polymer-composite cone, 38-mm (1-1/2 in) voice-coil

Low Frequency Extension

29 Hz (DIN)

Sub / Sat Phase Alignment

Variable 0° - 180°

Finishes

Black Ash

Inputs

Two RCA (L/R-Mono) for L/R Line-Out or Sub-Out / LFE-Out of receiver, processor or other line-level source

Weight

29 lbs. (13.2 kg)

Dimensions   HxWxD
Includes grilles and feet

15.5" × 13.125" × 15.25"
(39.4cm × 33.3cm × 38.7cm)

Wireless Band

2.4 GHz

Latency

13 ms

Maximum Wireless Range

15' / 50m

Sampling Rate

48 kHz, 16 bits

Subs Per Transmitter

1

Reviews

(No reviews yet) Write a Review